Brine unit cooler is applied in processing rooms and cold rooms where normally ethylene glycol, etc. are used as refrigerant. 400/ 500/ 630 mm external rotor fan, 12.7mm bare cooper tube, corrugated fin, optimized piping design are adopted, featuring compact structure, low profile, low noise, highly efficiency, high performance and longer life.

❄️ ‌I. High-Efficiency Structure & Performance‌

1. ‌Compact & Low-Noise Design‌:
   Utilizes 400/500/630mm external rotor fans and a low side-height structure, saving space while reducing operational noise significantly.
2. ‌Enhanced Heat Transfer‌:
   Combines 12.7mm smooth copper tubes with corrugated fins and optimized circuit design, boosting heat exchange efficiency and cooling performance.

⚙️ ‌II. Deep-Freeze Adaptability‌

1. ‌Wide Temperature Coverage‌:
   Compatible with brine-based coolants (e.g., ethylene glycol, propylene glycol), suitable for environments ranging from -18°C cold storage to -35°C rapid-freezing rooms (e.g.,GFL series).
2. ‌Freeze & Corrosion Resistance‌:
   Coolants remain liquid down to -50°C, with non-corrosive properties ensuring long-term stability.

🛡️ ‌III. Reliability & Maintainability‌

1. ‌Modular Durability‌:
   Powder-coated aluminum casing + stainless steel core components (e.g., ECG series) resists high-humidity corrosion, extending lifespan by >50%.
2. ‌Easy Maintenance‌:
   Double-layer drain pans (hinged outer pan + sloped inner pan) enable quick disassembly and cleaning, minimizing downtime.

💡 ‌IV. Energy Efficiency & Eco-Friendliness‌

1. ‌Optimized Energy Use‌:
   Triangular coil arrangement (38.1×33mm tube spacing) and hydrophilic aluminum fins (4–6mm fin spacing) synergistically reduce energy consumption.
2. ‌Environmental Compliance‌:
   Replaces fluorinated refrigerants with water-based coolants, eliminating ozone depletion risks and aligning with green refrigeration standards.

🏭 ‌V. Scenario Adaptability‌

1. ‌Versatile Applications‌:
   Ideal for processing rooms, cold storage (meat/seafood), pharmaceutical cold chains, and high-humidity environments.
2. ‌Customizable Configurations‌:
   Supports tailored fin spacing/airflow designs (DL/DD/DJ models) for precise temperature control (-5°C to -55°C).

📊 ‌Technical Specifications‌

      

Brine Unit Cooler for processing rooms and cold rooms最先出现在China Evaporator, Condenser, Condensing Unit Suppliers, Manufacturers, Factory - GINYARD！。

Post harvest fresh produce unit cooler is designed for non-packaging fresh fruits, flowers and vegetables cold room or CA rooms. Specially designed long air throw 500mm external rotor fans,12.7mm inner grooved copper tube, flat fins or corrugated fins, large heat exchange surface, non-corrosive design help the cold room to keep in a high humidity environment and small KTD, which eventually, keep the moisture in the fresh produces.

1. Flexibility and Convenience

1. ‌Mobile Deployment‌: Compact and lightweight mobile design allows quick repositioning according to storage layouts or temporary needs, without complex piping installations.
2. ‌Easy Installation‌: Modular structure enables operation with simple power and water connections, significantly reducing installation time and labor costs.

⚡ 2. High Efficiency and Energy Savings

1. ‌Rapid Cooling‌: Utilizes advanced refrigeration technologies (e.g., evaporative cooling, high-efficiency compressors) to achieve noticeable temperature drops quickly (e.g., within 30 minutes) and precisely maintain set temperatures.
2. ‌Low-Energy Operation‌: Energy-saving compressors and intelligent temperature control systems automatically adjust power output, reducing wasted energy by 30%-50% compared to conventional equipment.

🛡️ 3. Environmental Adaptability and Durability

1. ‌Corrosion-Resistant Materials‌: Key components use stainless steel and anti-corrosion coatings to withstand high-humidity, low-temperature environments, extending service life.
2. ‌Dehumidification & Purification‌: Powerful ventilation systems reduce humidity to inhibit mold growth and expel harmful gases (e.g., ammonia odors), maintaining fresh air.

🤖 4. Intelligent Control and Maintenance Convenience

1. ‌Automated Operation‌: Smart systems monitor temperature/humidity in real time, automatically activating/deactivating and adjusting cooling capacity to minimize manual intervention.
2. ‌Easy Maintenance‌: Modular design facilitates rapid part replacement. Features like automatic cleaning (e.g., water-flushing defrosting) reduce failure rates and downtime.

🌾 5. Application Scenario Adaptability

1. ‌Broad Compatibility‌: Suitable for fruit/vegetable cold storage, meat freezing warehouses, cold chain transport vehicles, etc., effectively extending agricultural product shelf life and reducing spoilage.
2. ‌Functional Expandability‌: Some models offer customizable features like constant temperature/humidity control, humidification, or air purification for diverse storage needs.

      

Post harvest fresh produce unit cooler Specific Unit cooler for Agricultural最先出现在China Evaporator, Condenser, Condensing Unit Suppliers, Manufacturers, Factory - GINYARD！。

Ginyard&Thermowe water defrost unit cooler is regarded as one of the most reliable water defrost evaporator in China market. The unique water distribution system ensures the even distribution of water across the coil and drainage, and the same time, avoiding the icing for low temperature on the middle drain pan between the fans and coil. Improved anti-spray panels ensure the defrost water stays inside the unit.

      

Water defrost unit cooler avoiding the icing for low temperature on the middle drain pan between the fans and coil最先出现在China Evaporator, Condenser, Condensing Unit Suppliers, Manufacturers, Factory - GINYARD！。

Ginyard designs and fabricates a special unit cooler dedicated to automatic stereoscopic refrigerated warehouse application. 630/ 800mm external rotor fans, inner grooved copper tubes, corrugated fins, AlMg casings and state-of-art design ensures highest performance of cold room and even distribution of temperature.

      

Unit cooler for automatic stereoscopic warehouse design ensures highest performance of cold room最先出现在China Evaporator, Condenser, Condensing Unit Suppliers, Manufacturers, Factory - GINYARD！。

Dual discharge/Slim type unit coolers are widely used in small or medium sized preparation rooms, docks, packaging rooms, platforms, rear replenishment cold rooms or low height cold rooms.

Standard Thermowe dual discharge unit coolers are using 300/400/500mm 6Pole low noise external rotor fans, inner grooved copper tubes, corrugated fins and AlMg casings.

The compact design, low noise, low profile and high efficiency makes the longest cold room integrity and working life.

      

Dual discharge-Slim type unit coolers widely used in small or medium sized preparation rooms最先出现在China Evaporator, Condenser, Condensing Unit Suppliers, Manufacturers, Factory - GINYARD！。

Carbon dioxide(R744) evaporator is recommended for small, medium and large-scale cold rooms where environmentally friendly refrigerant has to be used.  300/ 400/ 500/ 630 mm external rotor fans are used in this series and direct-expansion type of R744 evaporator is made of thick-wall copper tubes, while pump type of R744 evaporator is made of SS304 tubes. All the series of R744 evaporator is adopting flat or corrugated fin and optimized piping design, featuring high working pressure (80 bars gauge), compact structure, low noise, highly efficiency, high performance, energy saving and longer life.

Unit Cooler (also called air cooled evaporator) is commonly used for optimal distribution of cooled air in refrigerated cold rooms or freezer rooms. Ginyard unit cooler is made of a heavy-gauge, smooth finished aluminum cabinet or galvanized steel with a copper coils, aluminum plate fin foils and permanently lubricated ball bearing fan motors with inherent thermal protection. Our unit coolers range from low velocity to low profile to heavy-duty cooler and freezer models, in air, electric or hot gas defrost configurations which can provide efficient cooling for convenience stores, supermarkets, beverage storage, restaurants, refrigerated warehouses, industrial and pharmaceutical applications.

      

Carbon Dioxide Unit Cooler最先出现在China Evaporator, Condenser, Condensing Unit Suppliers, Manufacturers, Factory - GINYARD！。

Blast freezers or chillers are used in food fast freezing and cooling process. Thermowe blast freezer satisfies the strictest requirements of energy consumption and efficiency.

High pressure and low temperature fan motors, inner grooved copper tubes, corrugated fins and SS or AlMg casings adopted ensure highest performance of cold room temperature and food quality.

Unit Cooler (also called air cooled evaporator) is commonly used for optimal distribution of cooled air in refrigerated cold rooms or freezer rooms. Ginyard unit cooler is made of a heavy-gauge, smooth finished aluminum cabinet or galvanized steel with a copper coils, aluminum plate fin foils and permanently lubricated ball bearing fan motors with inherent thermal protection. Our unit coolers range from low velocity to low profile to heavy-duty cooler and freezer models, in air, electric or hot gas defrost configurations which can provide efficient cooling for convenience stores, supermarkets, beverage storage, restaurants, refrigerated warehouses, industrial and pharmaceutical applications.

      

Blast freezers or chillers- Fast Cooling Series Air Coolers最先出现在China Evaporator, Condenser, Condensing Unit Suppliers, Manufacturers, Factory - GINYARD！。

The dual discharge GL range has been specifically designed for cold rooms with limited height for the preservation of fresh or frozen products and in food preparation and handling.

Range consists of 12 customizable models.

According to the room temperature, the range is divided as follows:

•  for higher temperatures (≥ 2 °C) with 3,5 mm fin spacing
•  for lower temperatures (≥ –25 °C) with 7 mm fin spacing, electric defrost version (ED) is recommended

On request, the models can be equipped with non-standard: coils, defrosting, and fan motors.

      

GL-DFE Specifications unit cooler最先出现在China Evaporator, Condenser, Condensing Unit Suppliers, Manufacturers, Factory - GINYARD！。

Cubic unit coolers are most widely used evaporators in cold rooms. Standard Thermowe cubic coolers are using 300/400/500/630mm external rotor fans, inner grooved copper tubes, corrugated fins and AlMg casings. The compact design, low noise, circuit design and high efficiency makes it become the first choice of cold room and refrigerated warehouse

Cubic unit coolers最先出现在China Evaporator, Condenser, Condensing Unit Suppliers, Manufacturers, Factory - GINYARD！。